17 November 2026 · 6 minute read
How to bounce stems in Pro Tools fast
Stems are not hard. They are slow, and slow is where mistakes live. Here is the one-pass method, the settings that matter, and the checks that keep you from bouncing twice.
The old way was one bounce per stem: solo the drums, Bounce Mix, name it, wait, repeat for bass, guitars, keys, vocals, effects. Real time, six times over, with a typo in the third one. Pro Tools has been able to bounce several sources in one pass since 2020, and that one change turns a stem delivery into about four minutes of setup and one wait.
Step 1: route the session into stem buses
A stem is whatever comes out of a bus, so the routing is the work. Make one aux per stem (Drums, Bass, Guitars, Keys, Vocals, BGVs, FX) and route the tracks to them. Reverbs and delays are the trap: a return fed by the vocal belongs in the vocal stem or in an FX stem, and you have to decide which before you bounce. Set the returns' outputs accordingly. Then route every stem aux to the main mix bus so the sum of the stems is the mix.
Check the sum before you bounce anything: solo-safe the stem auxes, play the mix, and flip between the master and the stems. If anything is reaching the master without going through a stem aux (a sidechain return, a print track, a stray instrument), it will be missing from the stems and your client will tell you so next week.
Step 2: one Bounce Mix, many sources
File > Bounce Mix (Cmd+Option+B). At the top, the Source list lets you pick more than one: each stem bus and the main output. Pro Tools bounces them all in one pass and appends the source name to the file name, so a File Name of SongTitle_v3 produces SongTitle_v3_Drums.wav, SongTitle_v3_Bass.wav and so on. Name the buses the way you want the files named; the dialog uses them exactly.
Step 3: the settings that matter
- File Type: WAV unless the spec says otherwise. Add MP3 is a checkbox when the client wants reference MP3s in the same pass.
- Format: Interleaved for most music deliveries. Multiple Mono if a post house or a stem-mastering engineer asked for it. Ask; it is a cheap question and an expensive re-bounce.
- Bit Depth and Sample Rate: match the session unless the spec says to convert. 24-bit at the session rate is the default answer. Converting in the bounce is fine for an MP3; for masters, bounce at native and convert deliberately.
- Offline: on. An offline bounce runs faster than real time on most sessions. Turn it off only if a plug-in in the chain misbehaves offline (some older hardware-emulation plug-ins do; you will hear it).
- Import After Bounce: off for a delivery; on if you are printing stems back into the session to check them, which is worth doing on anything important.
- Directory: choose it every time. The default is the session's Bounced Files folder, which is not where the client folder is.
Step 4: the selection
Bounce Mix bounces the timeline selection, or the whole session if there is none. Make a selection from a marker before the first downbeat to a marker after the last tail, and use the same one for every stem pass so the files line up to the sample. Put those two markers in the session and name them Bounce Start and Bounce End; next revision, you click two names instead of guessing where the reverb tail ends.
Step 5: save the preset
The Bounce dialog has a preset menu at the top. Once the format, file type, offline and directory are right, save it as "Stems 24 48" or whatever your delivery is. The next song is: open Bounce Mix, pick the preset, tick the sources, type the song title, Bounce. The preset does not remember sources (they depend on the session), so the stem-bus naming is doing the rest of the work.
Step 6: check before you send
Three checks, two minutes:
- The null test. Import the stems onto new tracks, flip the polarity on the mix bounce, play. Silence means the stems sum to the mix. Anything you hear is something that bypassed a stem bus.
- Lengths. Every file should be the same length. One short file means a source was muted or had no audio in the selection.
- Names. Open the folder and read them out loud. "Vox" and "Vocals" in the same delivery is the kind of thing that costs an email.
When not to use Bounce Mix
If the client wants every track, not stems, use File > Export > Selected Tracks as New Session, or Commit the tracks (right-click > Commit) with the inserts rendered and export the clips. Commit is also the right tool for a single track with a heavy chain that needs to go to another DAW. Bounce Mix is for things that come out of a bus.
The fast version
- Stem auxes, everything routed through one, sum checked.
- Bounce Start and Bounce End markers, selection made.
- Bounce Mix: preset, tick the sources, name, Bounce.
- Null test, lengths, names.
How Pete does this
Session Pilot is a Mac app. You talk, and Punch In Pete works Pro Tools: the routing, the markers, the Bounce Mix dialog and the Save panel behind it. He carries a playbook for Bounce Mix, so one sentence sets every field above.
Make stem buses for drums, bass, guitars, keys and vocals and route everything to them.
Bounce the stems and the mix, 24-bit WAV at the session rate, offline, to the client folder, named with the song title and v3.
The routing is instant. The bounce is a dialog, so Pete opens it, picks the sources, sets the format and the folder, names the files and starts it, which takes a few seconds, then reads back what landed and where. Nothing he did is a mixing decision: the buses are yours, the levels are yours, the stem split is yours. He fills in the form you would be filling in. Say it once and "deliver stems" becomes a recipe that runs the same way next time.
Not just another bounce or session prep app. Pete is the best assistant you'll ever have.
Session Pilot launches 16 December 2026 for Mac. Everyone on the wait list gets launch pricing locked and a 14-day free trial.
Join the wait listSession Pilot is not affiliated with or endorsed by Avid Technology, Inc. Pro Tools is a trademark of Avid Technology, Inc. Menu paths refer to Pro Tools 2026.11; older versions may differ.